Sheet 12 / Product Design & Prototyping
Product Design & Prototyping in Cairns
From an idea to a part you can hold: modelled in 3D, stress-checked, cut and formed. Our own aluminium longboard, built and ridden, is the example.

Designed, checked, then built
SAE Engineering in Cairns designs and builds new products and parts, from one-offs to small production runs: a part that does not exist yet, or a better version of one that keeps breaking.
The board in these pictures is our own. The deck is 12 mm 5083 marine-grade aluminium, 1158 mm long, with a cell pattern laid out on the golden angle and our logo cut through the middle. It was laser cut from plate and formed with eight 5-degree bends at each end, giving a 25 mm drop.
Before anything was cut, the deck was modelled in 3D and stress-checked for a 115 kg rider: hard landings, kick turns and the repeated flexing that leads to fatigue cracks. The analysis decided where solid plate had to stay. It also showed the bare deck was too highly stressed for a heavy rider, so the design adds a pair of aluminium ribs bolted underneath to stiffen it. The first rides, in October 2026, were on the bare deck. It rode well, and the ribs go on to stop it taking a permanent bend over time. That is the loop we run on any part: model it, check it, build it, test it, change it.
The same process works for brackets, enclosures, machine parts, jigs and fixtures. Where a plastic test part answers the question faster, we 3D print one first.

What the design work covers
- 3D models and drawings
- Parts and assemblies modelled in 3D, with workshop drawings and DXF cut files for laser, plasma or waterjet.
- Finite-element stress analysis
- Stress, deflection and fatigue checked against the loads the part will really see.
- Renders
- Photo-quality pictures from the same 3D model, so you can see the part and sign it off before it is made.
- Prototypes
- The first parts cut, formed and welded in the workshop, or 3D printed in plastic to check the fit.
- Small production runs
- Once the prototype works, we can build the batch from the same drawings and cut files.
Case study: a 12 mm aluminium longboard
Photos of the deck as first ridden, and renders from its 3D model. Every caption says Photo or Render. Tap or click a figure to see it full size.
Questions we get asked
Do I need finished drawings to start?
No. A sketch, a photo of the part that keeps breaking or a description of what it has to do is enough to start. Drawings come out of the design work.
What does a prototype cost?
It depends on the size, the material and how many design rounds it takes. Send what you have and we will price it.
Will you keep my idea confidential?
Yes. What you send us stays between us. Who owns the drawings, 3D model and cut files, and whether we can ever show the work, is agreed in writing in the quote before any work starts.
Can you check a design someone else drew?
Yes. Send the model or drawings and the loads it has to carry. We run the stress analysis and tell you where it is likely to bend, crack or wear out, and what to change.
How long does a prototype take?
It depends on how many design rounds it needs and how long the material and cutting take. Tell us your deadline when you send the sketch.
What materials do you work in?
Mostly steel and aluminium plate and section, cut, formed and welded. Where a plastic part answers the question faster, we 3D print a test piece first.
Where we work
Based in Cairns. We travel to the Tablelands, Cape York and across Far North Queensland, and interstate for the right job.
Need a part nobody makes?
Send whatever you have, rough or finished. We will model it, check it and price the prototype.




